These instructions apply to our Mac users who need help with the installation and setup of their DYMO LabelWriter 4XL Thermal Printer in order to print from ShipEngine.
Setting up a DYMO LabelWriter 4XL label printer on your Mac can be done in just a few steps...
- Connect the DYMO to your Mac via USB
- Add the DYMO to your Printers & Scanners System Preferences
- Configure your printer defaults in CUPS
Add the DYMO to the Printers & Scanners System Preferences
Once you've connected your DYMO to your Mac through USB, you'll be able to add it right away to your Printers & Scanners System Preferences.
Here's a short GIF illustrating how to add the DYMO 4XL. The individual steps for this process are listed just below.
Click on System Preferences under the Apple Menu () in the top left corner of your computer screen.
Then click the Printers & Scanners icon.
Next, click the + button under the Printers window. From the dropdown, click Add Printer or Scanner...
On the page that appears, select the printer you wish to add. Here, you'll be selecting the DYMO LabelWriter 4XL that is listed as being connected via USB.
Once you click Add, the printer will be saved!
Configure your printer defaults in CUPS
CUPS is the term used for the printer configuration settings on a Mac.
In CUPS you will set your default media size and type, so the labels print the correct size and with the best quality.
This process has several steps, so please follow the instructions in this article to configure your DYMO to print shipping labels.
Note: If you are not able to locate the 4"x6" label size in CUPS, your computer may not have the proper DYMO software installed. Click HERE to download it now.
Congratulations, you finished installing your DYMO printer!
A few important tips about using DYMO printers:
- The labels should be snug on the spool; there shouldn't be any space in between the two plastic pieces holding the spool in place.
- The cutout on the label strip should be on the left side of the printer.
- Only DYMO labels are compatible with the LabelWriter, so make sure that you're using those brand of labels.
- Regularly clean the optical sensor with the included cleaning card